Browse all practice questions for the Navy Uniques Forklifts Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Navy Uniques Forklifts Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which control lever on a 12k rough terrain forklift controls the opening and closing of the forks?
  • The attachment removal requires the boom extended to how many feet?
  • The EBFL load capacity and load center specify what pairing?
  • What is the primary purpose of a pre-operation forklift inspection?
  • Which statement accurately describes a safety feature required on forklifts used aboard Navy ships?
  • When descending a grade with a load, which braking method is recommended?
  • What is the operator looking for when inspecting an engine belt?
  • What is a load center and how does it affect forklift capacity?
  • An Extendable Boom Forklift is particularly useful for which capability?
  • Which set of three hand signals is listed?
  • Lifting a load on a forklift affects balance by producing which of the following?
  • How many forward gears does an EBFL have?
  • What is the main inventory card used by the Collateral Equipment Custodian?
  • Which statement best describes the purpose of the load chart?
  • Which statement best describes the timing for disconnecting a forklift battery after charging?
  • Which form describes the storage, preservation, and inventory duties?
  • What is the function of the overhead guard?
  • What does the stability triangle help you assess?
  • If you discover a hydraulic leak during operation, what steps should you take?
  • When approaching a loading or unloading zone, what is the recommended behavior?
  • How long is a Construction Equipment Operator License valid?
  • What does GFCI stand for?
  • Which of the following is NOT one of the four pedals in the cab of a 12k forklift?
  • Why is it important to keep the load centered over the forklift's wheels?
  • The center of balance for the rough terrain forklift is normally located where?
  • How does an operator initially check for engine or transmission leaks?
  • Which term describes the combined center of balance in forklift operations?
  • Collapsed Height on a forklift refers to the position of which component?
  • In refueling a propane-powered forklift, which steps constitute the correct shutdown procedure before fueling?
  • How should hydraulic system leaks be checked during inspection?
  • The 11k EBFL load center is equal to how many inches?
  • What form is used when conducting forklift preventative maintenance?
  • Which of the following is a duty of the Collateral Equipment Custodian?
  • When lifting a load, which practice helps maintain stability?
  • Who designates the License Examiner/Mishap Investigator?
  • What item must be disconnected from an EBFL carriage to allow the carriage to be removed?
  • CB-60 Form is primarily used as which card?
  • How many center balances are associated with forklift operations?
  • NAVFAC 11260/4 is used for which report?
  • The fuel tank location on an EBFL is behind the cab on which side?
  • What precautions should you take when operating forklifts on wet or icy ship decks?
  • Which item is NOT one of the five major EBFL components?
  • If you need to tilt the forks forward or backward, which control lever do you use on the 12k rough terrain forklift?
  • To maximize stability, where should the load be placed on the forks?
  • What does EBFL stand for?
  • How many major EBFL components were listed?
  • What should you do when you encounter a wet surface or other hazard on the deck?
  • Which statement about hydraulic leaks is correct?
  • Which term describes the center balance to the sides?
  • Which action is NOT a recommended post-shift action?
  • What is the proper procedure to refuel a propane-powered forklift?
  • How many functions does the switch pad on a 12k rough terrain forklift have?
  • How should you handle a damaged forklift on a Navy ship?
  • What feature does an Extendable Boom Forklift have that typical forklifts do not?
  • What happens to the center of balance when the height of the load is increased?
  • What is the purpose of keeping the forklift's center of gravity within the stability triangle during operation?
  • During carriage work, how far is the EBFL boom extended to assist?
  • Which action is associated with the Emergency Stop hand signal?
  • On a 12k rough terrain forklift, which lever is used to operate the forks?
  • Which steps correctly secure a load to prevent tipping?
  • What safety steps should be followed when charging an electric forklift battery?
  • CESE stands for?
  • Who maintains the CB-60 Form?
  • What is the ground clearance of the 12k model?
  • What is the center of gravity in forklift operation?
  • During a pre-operation inspection, which component should be checked for cracks or bends?
  • Which option is a major EBFL component?
  • During a turn with a load, which action would increase tipping risk?
  • The tipping point on a forklift is most closely associated with which term?
  • How many indicators are on the monitor panel of the 12k?
  • What are hand signals used for in equipment operations?
  • Who is generally allowed to ride on a forklift during normal operation?
  • Which PPE is required for forklift operation and why?
  • What is the ground clearance of a 12k rough terrain forklift?
  • What are best practices for stacking pallets to maintain stability?
  • Is it safe to travel with the forks raised?
  • Which statement is true about EBFL forward gears?
  • Name two considerations when selecting the proper forks.
  • The term 'combined center of balance' is most relevant when performing which operation?
  • Where is the transmission control/shift lever located on a 12k rough terrain forklift?
  • Where are the climate controls located on an EBFL?
  • Which description best characterizes a counterbalance forklift?
  • What is the proper process to pick up a pallet with a forklift?
  • During a deck spill cleanup, which action should be taken first?
  • What is the purpose of a load chart?
  • How should you raise and lower loads to maintain stability?
  • How should you respond to a near-miss involving a forklift?
  • How do you determine the load center distance and why is it critical?
  • EBFL stands for what in forklift terminology?
  • How should you perform a swiveling turn with a loaded forklift?
  • At what distance is the EBFL boom extended for attachment and detachment of a carriage?
  • After initial start, how long should the engine of an Extendable Boom Forklift (EBFL) be kept at partial throttle before returning to idle speed?
  • The monitor panel indicators for 12k are how many?
  • Which combination best promotes forklift stability during all operations?
  • In what position should the instrument panel gauge needles be when the key is turned on for a 12k rough terrain forklift?
  • How should you ensure pedestrian safety when operating a forklift in a Navy facility?
  • Which of the following describes EBFL forward gears correctly?
  • Which of the following is a steering mode of an EBFL?
  • What is the main consideration for fork selection for a given load?
  • Which of the following items would be considered collateral equipment?
  • What does depressing the differential lock switch on the 12k rough terrain forklift accomplish?
  • Which of the following is a type of Operational Check?
  • The 12k Rough Terrain Forklifts Switch Pad has how many functions?
  • Which of the following is NOT a function of the Dispatcher?
  • If a dashboard warning light indicates a fault, what is the safest initial action?
  • When lifting a taller load, what happens to the center of balance?
  • If you no longer see your signalman, what is the first action you should take?
  • Where is the fuel tank located on an EBFL?
  • Name two types of rough terrain forklifts.
  • Which steps should you perform after completing a shift?
  • What is the primary purpose of rough terrain forklifts?
  • Where is the center of balance normally located on a rough terrain forklift?
  • Which practice is part of a safe reverse movement with a forklift?
  • Which of the following actions is recommended when traveling on a ramp?
  • When should the horn be used?
  • Which of the following best lists the main types of forklifts used in Navy operations?
  • Name the four pedals in the cab of a 12k forklift
  • What capability does the center fork control lever on a 12k rough terrain forklift provide?
  • What is the maximum off-road speed of an EBFL?
  • Which of the following is an example of collateral equipment?
  • What are the steps to shut down a forklift safely?
  • What is the effect of tilt controls on load stability during lifting and stacking?
  • Which pair of forms is used during the operational check?
  • What is the universal PPE requirement for forklift operation?
  • When a load is lifted on a forklift, the balance condition is described by which concept?
  • When traveling on a ramp or incline, what should you do to the forklift and load?
  • An EBFL has _____ pound load capacity with a ______ inch load center.
  • Which option is NOT one of the five major EBFL components?
  • Which forklift type is typically used to access items on high shelves in a warehouse?
  • Hard Card is which form?
  • The 11k EBFL load center is which inches?
  • Which signals are used by forklift operators to communicate with nearby personnel?
  • Which of the following is a safety consideration when using a work platform on a rough terrain forklift?
  • What are the two main centers of balance for a rough terrain forklift?
  • What is the stability triangle in forklift operation and why is it important?
  • How far should the forks be lowered when landing a load with a 12k rough terrain forklift?
  • What steps should you take when passing another vehicle in a narrow aisle?
  • Which is the second safety consideration when using a work platform on a rough terrain forklift?
  • Where should the load be placed prior to tilting the forks forwards on a 12k rough terrain forklift?
  • How many hydraulic pistons control the forklift on a 12k rough terrain forklift?
  • Why keep the load as close to the mast as possible during lifting?
  • Where is the forklift center of balance located?
  • How should you position forks when not lifting a load?
  • In relation to rough terrain forklifts, what does MHE stand for?
  • When using the load chart, which statement best describes how to determine safe load?
  • In forklift operations, what part of the forklift acts as the fulcrum?
  • Name a piece of collateral equipment.
  • NAVSUP Publication 538 relates to which topic?
  • What is inspected regarding access covers when performing operator preventative maintenance?
  • For 11k EBFL, which extension positions are extended?
  • How can you identify a counterbalance forklift?
  • Which items are inspected on the engine belt during preventative maintenance?
  • In the event of a tip-over, what should you do?
  • How many functions does the 12k Rough Terrain Forklifts Switch Pad have?
  • How should you handle a loaded forklift on a slippery surface?
  • Which factor is a consideration when selecting the proper forks?
  • What height should the forks be kept off the ground while traveling?
  • Which of the following are common causes of forklift tip-overs?
  • Which action is essential to ensure safety before refueling a propane-powered forklift?
  • The pivot point where tipping occurs on a forklift is called the?
  • How should you check that the forklift forks are not damaged or bent?
  • How often should forklift operators receive refresher training?
  • What is the primary function of a load backrest?
  • Which statement best describes the range of forklift types used in Navy operations?
  • Which part of the forklift serves as the pivot point during lifting?
  • What is the safe procedure for cleaning up spills on a deck?
  • Which safety features are required on forklifts used on Navy ships?
  • Which joystick mode on an EBFL controls frame sway?
  • Explain the purpose of fork tilt and mast tilt controls.
  • What is the purpose of a load backrest on a forklift?
  • What visual cue can indicate engine or transmission leaks during an initial inspection?
  • If you need Navy standards on handling equipment, which publication would you consult?
  • Yard Boss Crew Members consist of which role?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy